Public Projects
Browse wiring projects shared by the YourSpec community. Use any project as a starting point for your own build.
287 projects · Page 10 of 29
FuelTech 550 Flying Lead Base /32
$333.31Rev 4
This project can be used as a template to build a custom FuelTech 550 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Review FuelTech Datasheet for Pin Information Fuel Tech Notes: Connector "A" 1 - Outputs that can be used as “Tach output”: Blue #3, blue #6, gray #4 (FT450) 2 - The blue output #6 can be used as the fifth ignition output (FT450) 3 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 4 - When using as an injector output a Peak and Hold driver must be used 5 - The blue output #5 Can be used with PWM idle valve or VVT Controller (FT450);
Connector "B" 1 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 2 - When using as an injector output a Peak and Hold driver must be used
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Review FuelTech Datasheet for Pin Information Fuel Tech Notes: Connector "A" 1 - Outputs that can be used as “Tach output”: Blue #3, blue #6, gray #4 (FT450) 2 - The blue output #6 can be used as the fifth ignition output (FT450) 3 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 4 - When using as an injector output a Peak and Hold driver must be used 5 - The blue output #5 Can be used with PWM idle valve or VVT Controller (FT450);
Connector "B" 1 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 2 - When using as an injector output a Peak and Hold driver must be used
Wires
54
Total length
435′
Haltech Elite 1500 Flying Lead Base (/16 Tefzel, Color)
$450.68Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (/16 Tefzel, White)
$423.47Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (/32 Tefzel, Color)
$315.62Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (/32 Tefzel, White)
$261.53Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (TXL, Color)
$252.52Rev 10
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with TXL wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (TXL, White)
$237.45Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with TXL wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 2500 Flying Lead Base (/16 Tefzel, Color)
$510.34Rev 2
This project can be used as a template to build a custom Haltech Elite 2500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
60
Total length
512′
Haltech Elite 2500 Flying Lead Base (/16 Tefzel, White)
$494.64Rev 2
This project can be used as a template to build a custom Haltech Elite 2500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
60
Total length
512′
Haltech Elite 2500 Flying Lead Base (/32 Tefzel, Color)
$348.31Rev 3
This project can be used as a template to build a custom Haltech Elite 2500 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
60
Total length
512′