Project: Haltech Elite 550 Flying Lead Base (TXL)
This project can be used as a template to build a custom Haltech Elite 550 flying lead harness with TXL wire.
- All terminated wire lengths are set to 8 feet
- 6 ft unterminated sensor power and ground wires are included for creating branches
Just copy this project and make any edits as desired!
Warnings may impact the processing time or readability of marking on certain wires.
Please see details below.
Wire has low stock. Order processing could be delayed. | |
Wires: | 18 |
Wire Marking | Wire End 1 | Wire End 2 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
# | Qty | Name | Wire Type | Wire Gauge | Wire Color | Length | Mark | Text | Strip | Pin | Crimped | Connector | Strip | Pin | Crimped | Connector |
1 | 1 | Air temp sensor | TXL | 22 AWG | Gray | 8' 0" | IAT | SUPERSEAL 1.0 (-4) | ||||||||
2 | 1 | Coolant temp sensor | TXL | 22 AWG | Violet | 8' 0" | CLT | SUPERSEAL 1.0 (-4) | ||||||||
3 | 1 | Throttle position sensor | TXL | 22 AWG | White | 8' 0" | TPS SIG | SUPERSEAL 1.0 (-4) | ||||||||
4 | 1 | Analog Input 3 (MAP) | TXL | 22 AWG | Yellow | 8' 0" | ANALOG IN 3 | SUPERSEAL 1.0 (-4) | ||||||||
5 | 1 | Analog Input 1 (shielded) | 1 Conductor Shielded Tefzel (M27500-22TG1T14) | 22 AWG | White | 8' 0" | ANALOG IN 1 | |||||||||
Analog Input 1 (shielded)-1 | Inner conductor: 1-WHITE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Analog Input 1 (shielded)-2 | Inner conductor: SHIELD | |||||||||||||||
6 | 1 | Digital Input 1 (shielded) | 1 Conductor Shielded Tefzel (M27500-22TG1T14) | 22 AWG | White | 8' 0" | DIGITAL IN 1 | |||||||||
Digital Input 1 (shielded)-1 | Inner conductor: 1-WHITE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Digital Input 1 (shielded)-2 | Inner conductor: SHIELD | |||||||||||||||
7 | 1 | Crank trigger | 4 Conductor Shielded Tefzel (M27500-22TG4T14) | 22 AWG | White | 8' 0" | CRANK POS | |||||||||
Crank trigger-1 | Inner conductor: 1-WHITE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Crank trigger-2 | Inner conductor: 2-BLUE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Crank trigger-3 | Inner conductor: 3-ORANGE | |||||||||||||||
Crank trigger-4 | Inner conductor: 4-GREEN | |||||||||||||||
Crank trigger-5 | Inner conductor: SHIELD | |||||||||||||||
8 | 1 | Cam trigger | 4 Conductor Shielded Tefzel (M27500-22TG4T14) | 22 AWG | White | 8' 0" | CAM POS | |||||||||
Cam trigger-1 | Inner conductor: 1-WHITE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Cam trigger-2 | Inner conductor: 2-BLUE | SUPERSEAL 1.0 (-4) | ||||||||||||||
Cam trigger-3 | Inner conductor: 3-ORANGE | |||||||||||||||
Cam trigger-4 | Inner conductor: 4-GREEN | |||||||||||||||
Cam trigger-5 | Inner conductor: SHIELD | |||||||||||||||
9 | 1 | Switched 12V ECR Relay | TXL | 20 AWG | Red | 8' 0" | ECR SWITCHED | |||||||||
10 | 1 | Signal GND (body) | TXL | 22 AWG | Black | 8' 0" | SIG GND | |||||||||
11 | 1 | CAN H | TXL | 22 AWG | White | 8' 0" | CAN H | SUPERSEAL 1.0 (-4) | ||||||||
12 | 1 | CAN L | TXL | 22 AWG | Blue | 8' 0" | CAN L | SUPERSEAL 1.0 (-4) | ||||||||
13 | 1 | Signal GND | TXL | 22 AWG | Black | 8' 0" | SIG GND | SUPERSEAL 1.0 (-4) | ||||||||
14 | 1 | Injector 1 | TXL | 18 AWG | Blue | 8' 0" | INJECTOR 1 | SUPERSEAL 1.0 (-3) | ||||||||
15 | 1 | Injector 2 | TXL | 18 AWG | Blue | 8' 0" | INJECTOR 2 | SUPERSEAL 1.0 (-3) | ||||||||
16 | 1 | Injector 3 | TXL | 18 AWG | Blue | 8' 0" | INJECTOR 3 | SUPERSEAL 1.0 (-3) | ||||||||
17 | 1 | Injector 4 | TXL | 18 AWG | Blue | 8' 0" | INJECTOR 4 | SUPERSEAL 1.0 (-3) | ||||||||
18 | 1 | 12V Power Input | TXL | 16 AWG | Red | 8' 0" | +12V | SUPERSEAL 1.0 (-3) | ||||||||
19 | 1 | Main GND | TXL | 16 AWG | Black | 8' 0" | MAIN GND | SUPERSEAL 1.0 (-3) | ||||||||
20 | 1 | Ignition 1 | TXL | 20 AWG | Green | 8' 0" | IGNITION 1 | SUPERSEAL 1.0 (-4) | ||||||||
21 | 1 | Ignition 2 | TXL | 20 AWG | Green | 8' 0" | IGNITION 2 | SUPERSEAL 1.0 (-4) | ||||||||
22 | 1 | Ignition 3 | TXL | 20 AWG | Green | 8' 0" | IGNITION 3 | SUPERSEAL 1.0 (-4) | ||||||||
23 | 1 | Ignition 4 | TXL | 20 AWG | Green | 8' 0" | IGNITION 4 | SUPERSEAL 1.0 (-4) | ||||||||
24 | 1 | Digital Out 5 (Fuel pump trigger) | TXL | 20 AWG | Green | 8' 0" | DIGITAL OUT 5 | SUPERSEAL 1.0 (-4) | ||||||||
25 | 1 | +5v supply | TXL | 22 AWG | Orange | 8' 0" | +5V | SUPERSEAL 1.0 (-4) | ||||||||
26 | 1 | Digital out 1 | TXL | 20 AWG | Violet | 8' 0" | DIGITAL OUT 1 | SUPERSEAL 1.0 (-4) | ||||||||
27 | 1 | Digital out 2 | TXL | 20 AWG | Violet | 8' 0" | DIGITAL OUT 2 | SUPERSEAL 1.0 (-4) | ||||||||
28 | 1 | Digital out 3 | TXL | 20 AWG | Violet | 8' 0" | DIGITAL OUT 3 | SUPERSEAL 1.0 (-4) | ||||||||
29 | 1 | Digital out 4 | TXL | 20 AWG | Violet | 8' 0" | DIGITAL OUT 4 | SUPERSEAL 1.0 (-4) | ||||||||
30 | 3 | Signal GND (loose for building sub branches) | TXL | 22 AWG | Black | 6' 0" | SIG GND | |||||||||
31 | 2 | +5v supply (loose for building sub branches) | TXL | 22 AWG | Orange | 6' 0" | +5V |