Public Projects
Browse wiring projects shared by the YourSpec community. Use any project as a starting point for your own build.
278 projects · Page 9 of 28
Emtron SL8 Flying Lead Template (Tefzel /16, Color)
$454.42Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
Emtron SL8 Flying Lead Template (Tefzel /16, White)
$445.37Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
Emtron SL8 Flying Lead Template (Tefzel /32, Color)
$297.09Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
Emtron SL8 Flying Lead Template (Tefzel /32, White)
$256.20Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
Emtron SL8 Flying Lead Template (TXL, Color)
$247.52Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with TXL wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
Emtron SL8 Flying Lead Template (TXL, White)
$238.77Rev 2
This project can be used as a template to build a custom Emtron SL8 flying lead harness with TXL wire.
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
All terminated wire lengths are set to 8 feet
4 ft unterminated sensor power and ground wires are included for creating branches
Sync shielded wires are 3-conductor
Knock sensors are 2-conductor shielded wire
Wires
63
Total length
392′
EMU Pro Power + CPS Harness
$57.64Rev 5
Used to test/program the EMU Pro 16 and collect crank trigger data for development.
NOTE - Power wire gauge is not suitable for running anything with load!
NOTE - Power wire gauge is not suitable for running anything with load!
Wires
11
Total length
38′
FuelTech 550 Flying Lead Base /32
$333.31Rev 4
This project can be used as a template to build a custom FuelTech 550 flying lead harness with M22759/32 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Review FuelTech Datasheet for Pin Information Fuel Tech Notes: Connector "A" 1 - Outputs that can be used as “Tach output”: Blue #3, blue #6, gray #4 (FT450) 2 - The blue output #6 can be used as the fifth ignition output (FT450) 3 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 4 - When using as an injector output a Peak and Hold driver must be used 5 - The blue output #5 Can be used with PWM idle valve or VVT Controller (FT450);
Connector "B" 1 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 2 - When using as an injector output a Peak and Hold driver must be used
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Review FuelTech Datasheet for Pin Information Fuel Tech Notes: Connector "A" 1 - Outputs that can be used as “Tach output”: Blue #3, blue #6, gray #4 (FT450) 2 - The blue output #6 can be used as the fifth ignition output (FT450) 3 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 4 - When using as an injector output a Peak and Hold driver must be used 5 - The blue output #5 Can be used with PWM idle valve or VVT Controller (FT450);
Connector "B" 1 - In order to avoid backfeeding when using the blue outputs or gray output #4 to power relays or actuators, make sure the switched 12V that powers them is the same that powers the ECU. 2 - When using as an injector output a Peak and Hold driver must be used
Wires
54
Total length
435′
Haltech Elite 1500 Flying Lead Base (/16 Tefzel, Color)
$450.68Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′
Haltech Elite 1500 Flying Lead Base (/16 Tefzel, White)
$419.87Rev 2
This project can be used as a template to build a custom Haltech Elite 1500 flying lead harness with M22759/16 wire.
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
All terminated wire lengths are set to 8 feet
6 ft unterminated sensor power and ground wires are included for creating branches Just copy this project and make any edits as desired!
Wires
51
Total length
440′